Today in Russia there are not many manufacturers of molds for metal injection molding. At the same time, most companies involved in their development purchase foundry equipment abroad. The main suppliers are the countries of Southeast Asia (China, South Korea, Taiwan), as well as European companies.
However, there are still manufacturers in our country from whom you can order a mold for manufacturing metal products. In our short review, we bring to your attention several such enterprises from various cities of Russia.
The only metropolitan enterprise in our review that has been producing metal products to order for more than 10 years. The services offered by the company include the entire cycle of creating a mold: from development technical documentation and the project before turning certain parts (you can read more about turning).
The company has its own wide production base and independently produces turnkey molds, rather than ordering products from China. The clients of JSC "NTC-BULAT" are many large manufacturers automotive parts, fire fighting, medical, electronic and other equipment from all over the country.
A large enterprise that produces a huge number of molds for casting not only metal alloys, but also rubber, caoutchouc and plastic. Employees of the Kaluga company have extensive experience in manufacturing wedge molds, molds with multiple parting planes, multi-stage ejection systems and many other types of products.
Kaluga Mold Plant uses modern multifunctional equipment and develops molds for any type of casting from scratch.
YaZTO has been developing cold-channel molds for the manufacture of parts by injection molding of non-ferrous metals for several years now. The company is one of the leaders in this market segment.
Among the advantages of the company are not only rich experience, but also, for example, a price that is 10% lower than the market average. During the production of molds, employees Yaroslavl plant Japanese equipment is used for technical equipment, and German CNC machines are used for turning.
YaZTO's clients are many domestic and foreign manufacturers of automotive parts.
The company, located in Yekaterinburg, produces molds of varying complexity for casting metals, rubber and plastics. ZiV also produces dies for cold stamping of metal (aluminum, copper, steel) and paronite with dimensions up to 300x500x400 mm according to customer drawings. The cost of a finished mold ranges from 30 to 100 thousand rubles.
The history of the plant goes back more than 90 years, and its staff has a large number of employees with ten years or more experience. The production base of the enterprise is constantly updated with modern equipment.
Manufacturer of molds in Ryazan, carrying out a full cycle of their production. The company is ready to undertake the development of drawings and designs of the mold or produce it according to the customer’s drawings.
TOCHTSVETLIT LLC has existed since 1999. During this time, the company has managed to establish itself as a reliable business partner and one of the main manufacturers of molds in the region. The production base of the enterprise is equipped with modern imported equipment.
Among the shortcomings that characterize almost all Russian mold manufacturers are:
Despite the mentioned disadvantages, ordering molds from Russian manufacturers also has many advantages:
Molds
TO category:
Production of precision castings
Molds
The main prerequisite for obtaining an accurate casting is an accurate model with a surface free of defects, with precisely maintained dimensions, meeting all the technological features that appear during the production of castings. To produce such a model, a precisely manufactured mold is used. Often, when choosing a lost wax casting method, the determining factor is the cost of the master model and the mold. Sometimes it may even be that the cost of making the master model and mold will be higher than the savings obtained by converting the part from machining to casting.
Molds for casting lost wax models must meet the following basic requirements: ensure the production of high-quality models (with the specified accuracy and surface cleanliness, without defects); minimum cooling time of the model.
According to the intended purpose and use of the mold, they are divided into:
a) for the production of the actual models;
b) for the manufacture of auxiliary technological parts (risers, manifolds, profits, etc.).
Based on their design, molds are classified into single-cavity (single-cavity); multi-cavity, not connected by a gating system; multi-cavity with replaceable inserts for assembly in conductors.
In terms of the degree of mechanization, molds can be simple, with models removed (manually); simple, with manual removal of models using a push system; complex, with removable rods. Molds are assembled with cores and mold parts and disassembled manually or using machinery; fully mechanized or automated.
According to the manufacturing methods, molds are classified into mechanically processed; cast from low-melting alloys; cast from zinc alloys; molded from plastics; cast from plaster; cast or pressed from rubber (rubber); processed by electroplating or metallization methods.
The cost of a mold mainly depends on its complexity; which determines the labor intensity of manufacturing and the material of the mold. These factors are decided by the technologist and designer. When designing a mold, the technologist and designer are guided by the requirements for castings and the number of castings in the series.
Rice. 1. Mold made machining
Molds produced by mechanical processing (Fig. 1) are widely used for the production of lost wax models. The entire mold is manufactured on machining machines without the use of a master model. The design of molds for simple castings (without internal cavities) is relatively simple, as is its manufacture. It is much more difficult and expensive to manufacture molds for castings with internal cavities or with a shaped parting plane. Models with internal cavities or with profile joints (the axes of which are not parallel to the direction of opening of the mold or extend outside the parting plane) must have retractable rods, the precise manufacture and fit of which in the mold is very labor-intensive. Such molds are made of steel and aluminum alloys. Aluminum alloys are preferable because they have high thermal conductivity. Pores and looseness are often found in cast billets made of aluminum alloys, which deteriorate the quality of the surface of the models.
Molds are manufactured according to the 6th IT accuracy class with a surface roughness of 0.4-0.8 microns according to Hsk. Model areas must be equipped with modern precision metal cutting machines. Models made in such molds are distinguished by high accuracy, and the molds themselves are durable.
Molds from low-melting alloys (Fig. 2) are made by pouring a low-melting alloy onto a metal master model installed in a steel frame. Each half of the mold is filled with different alloys that differ in melting point. With a flat part, the model is molded in a steel shell with a molding mixture consisting of quartz sand with 3% bentonite; mixture humidity 3.5-5.0%, wet strength 0.8-1.0 N/cm2.
With a curved connector, the model is fixed in a gypsum false slab. Before pouring plaster, the surface of the model is lubricated with oil. After the plaster has cured, the connector is cleaned to make it easier to remove the model. Then a second shell is installed on the shell with the false plate and the model and the assembled set is slowly heated to the temperature of pouring the low-melting alloy. To cast the first metal half, an alloy with a higher melting point is used. The temperature of the model and the fake slab is controlled by casting alloy chips poured onto the model. The temperature must be such that the chips melt to form balls of liquid alloy. A low-fusibility alloy should not be overheated more than 30-40 ° C above its melting point. Otherwise, the elements of the alloy burn away and it ceases to be eutectic. The use of non-eutectic alloys results in a rough mold surface.
Before pouring, oxide films and contaminants are removed from the molten alloy mirror. After pouring, the shell is carefully tapped to remove adhering air bubbles from the model, and the mirror of the poured metal is carefully heated to avoid its premature hardening. After the metal has cooled, the mold is disassembled and the model is removed from it. The mold connector is cleaned and technological cavities are made in it (gating channel, manifold, etc.). Rods, pushers and centering pins are turned on machining machines. The holes for the pushers are obtained by pouring the pushers themselves or auxiliary pins during the manufacture of the second half of the mold. The model must be firmly connected to the pusher so that distortion does not occur.
Rice. 2. Low-melting alloy mold
Rice. 3. Zinc alloy mold
The second half of the mold is filled with an alloy with a lower melting point compared to the alloy used for the first half of the mold. The surface of the first half of the mold is smoked with soot from burning oil before pouring. After pouring and cooling the second half of the mold, the model is removed and, if necessary, the cavity and mold connector are adjusted (fitting both halves of the mold). Minor defects in the cavity are corrected by soldering or sealed with resin.
For the first half of the mold, an alloy consisting of 80% lead, 14% antimony and 6% zinc with a melting point of about 250 ° C is usually used. The second half of the mold is cast from a low-melting alloy containing 51% tin, 31% lead and 18% cadmium with a melting point of 150 °C.
The surface of the working cavity of the mold is scraped and polished. This technology allows you to obtain a mold with an accuracy of 8-9th IT class. Master models are usually made from medium carbon steel. The surface of the model is polished. When making a model consisting of several pieces, it is not recommended to fasten them by soldering with hard and soft solders.
Low-melting models produced in cast molds have high-quality surface and satisfactory dimensional accuracy. However, molds quickly fail, so they are recommended for the production of a small series of castings. Cast molds made of low-melting alloys are impractical to use for the manufacture of large models due to the significant cost and high consumption of low-melting alloys.
Molds made of zinc alloys (Fig. 14) are made by pouring a master model with a zinc alloy in a steel shell.
When making complex molds or molds that are subject to increased precision requirements, pressure is applied to the mirror of the poured zinc alloy until the alloy completely solidifies. Compared with molds made of low-melting alloys, molds made of zinc alloys are harder, stronger, wear less and are deformed upon impact, i.e. the durability of a mold made of zinc alloy is slightly higher than that of a low-melting alloy.
The process of making molds from zinc alloys, which harden under pressure in the first phase, is similar to the process of making molds from low-melting alloys. First, a polished zinc or steel model is made. The model is molded with a sand mixture and buried 1 mm from the parting plane. Before pouring, the sand mold is smoked with soot, then a steel flask is installed on it and the set is heated to 260-280 ° C. A zinc alloy, superheated to 410-430 ° C, is poured into the shell. If the model is made of zinc alloy, then initially the entire set is cooled to room temperature, and then the model is again heated to 100-200 °C for better extraction.
The half-mold freed from the model is mechanically processed along the connector and the model is inserted into it, followed by smoking with soot. Then the second half of the shell is installed and the entire set is heated in an oven to 260-280 °C. The heated set is installed under a press, filled with zinc alloy and pressed with a punch with a force of at least 10 kN, depending on the size of the mold, until the alloy is completely solidified. After cooling to room temperature, the kit is again heated to 100-200 °C to facilitate its disassembly.
The cast first half of the mold is processed, and two or three blind holes are drilled on the parting plane for fixation with the second half of the mold. The pushers are fixed in the mold by pouring an alloy, or a hole is drilled in the mold for them.
The second half of the mold is cast in a similar way. The mold is machined to the required dimensions, the gating system is milled, pushers and rods are manufactured, and clamping devices are installed.
To make molds from zinc alloys without pressure, a split model is used. Both halves are installed separately on plates in the shell, heated to 420 °C and filled with zinc alloy at a temperature of 470-490 °C. After hardening and cooling, the shell is removed, the plate is removed and the model is removed. The mold parting plane is processed and both halves are connected using centering pins. Auxiliary parts of molds, such as pushers, rods, centering pins, etc., are usually made from steel by machining. It is relatively simple and cheap to make molds from zinc alloys without pressure, but this method is used with a simple parting plane.
Rice. 4. Plastic mold
Molds made of zinc alloys are quite durable, provide high quality models and are relatively inexpensive. They are suitable for making castings in large series, but are almost unsuitable for models with large cavities or with side and inclined rods. Costs for wages in the manufacture of zinc molds there is more, and the cost of the material is lower than in the manufacture of molds from low-melting alloys.
Molds obtained by filling the master model with plastics (Fig. 4) are very simple to manufacture and therefore cheap. They are not durable enough, and therefore they are used in the manufacture of castings in small series. The mold materials are dentacryl or epoxy resins. Considering that plastics are less thermally conductive than metal, they should be used for small-sized molds with an evenly distributed mass so that the model composition hardens evenly. To increase thermal conductivity, it is recommended to introduce fillers into resins - metal powders or shot.
The best master models are metal, polished; For less critical castings, wooden models are used. Practically for models can be used various materials, which do not deform when filled with plastics. Plaster models produce lower quality prints than wooden ones, and even more so metal ones.
Before pouring, the model is lubricated with a thin layer of release agent to better separate the master model from the poured mass. The following lubricants have proven themselves to be effective: 2% solution of silicone oil in trichlorethylene; A 2% solution of beeswax or carnauba wax in gasoline and a solution of castor oil in methyl or ethyl alcohols. The lubricant is applied with a brush or spray in a very thin layer so that the accuracy of the smallest elements of the model’s surface is not compromised.
The process of making molds from plastics is similar to the manufacturing process using liquid metal melts. It is most advisable to use gypsum false board. The plastic is poured at maximum speed in a continuous stream so that no air bubbles are mixed into the mixture. A stream of plastic is directed onto the connector plane, and the rising liquid level quietly covers the model. Air bubbles from resin filled with metal powder or shot are removed by vacuum or vibration.
It is recommended to use a mass consisting of CHS Erox 1200 resin, in which 80% (by mass) of steel shot measuring 0.3-0.5 mm is replaced. The mixture is heated to 50 °C while stirring, hardener P1 is added to it in a ratio of 7 hours per 100 hours of Erox 1200 resin and the resulting mixture is thoroughly mixed again.
Molds made of epoxy resins with a metal filler are often used to test casting technology or to produce small series of lost wax models. This method does not require much time, is cheap and is always used without mechanical processing. The disadvantage of plastic molds is lower accuracy and low thermal conductivity of molds compared to metal ones.
Gypsum molds can be used to make individual models without special requirements to their dimensional accuracy. The durability of such forms is very low, but given the low costs of their production, they are often used when testing technological solutions. The molds are detachable, with both halves cast in wooden or metal collapsible shells. The second half of the mold is poured over the first, as if over a false slab. To prevent the plaster from sticking, the connector of the first mold is lubricated with a release agent (a solution of wax in trichloroethane, gasoline or silicone oil; a solution of Vaseline in gasoline). Gypsum molds are not suitable for pressing the model composition into them under pressure. The model composition is poured into molds in a molten state by free pouring.
Molds made by pouring a master model with silicone rubber are used for the production of lost wax models that do not have precision requirements, for example, models of decorative objects or models for testing the casting technology being developed (for example, the density of castings with the selected gating system). Such forms are elastic, so models with negative slopes can be made in them.
Silicone rubber molds can also be made without a false slab by pouring the entire model. After hardening, the silicone rubber shell is cut along the connector. It is best to make a false slab from gypsum.
Guide pins can be poured into both halves of the mold; In addition, it is possible to make a model of the sprue channel from the model composition and mold it simultaneously with the model. Rubber molds in metal shells can be used to make models by pressing in the model composition at low pressure. In molds without shells, only free pouring of the model composition is allowed. The very low thermal conductivity of rubber molds lengthens the entire production cycle of models, but makes it possible to obtain models with a clear imprint and high quality surfaces.
Molds produced by electroforming processes can be used for very precise and complex models of medium weight. Such molds are not suitable for the production of models with deep pockets, grooves and holes; their production is relatively expensive, requires special equipment and therefore is not widely used in Czechoslovakia.
Molds produced using metallization have not yet been tested in production, but were reviewed by the authors from the technical and economic side with the previously described methods.
The basic principle of metallization is the application of liquid metal particles by a gas stream to the prepared surface of an object using a metallization gun. The metal wire in the gun is melted either by a flame, most often oxyacetylene, or by an electric arc. Upon impact, under the influence of kinetic energy, metal particles are deformed, adhering to each other and to the surface of the material, and form a firmly connected mass that accurately reproduces the shape of the object - the model. This method is not used for all types of models. Planes sprayed at an angle to the flow are more difficult to metallize or are not metallized at all when their area is large or at a very sharp angle of attack.
Any mold (steel, low-melting or zinc alloys, plastic) can be simple, complex and with varying degrees of mechanization. The mold can be designed only for a specific model configuration or be universal with replaceable inserts. The mold can be equipped with a water cooling device, and finally it can be used to make models or gating systems.
Of course, when producing models in small series or when single production do not use highly mechanized molds. Technology and costs for making a mold from different materials are different.
When designing molds for lost wax models, it is necessary to take into account the design features of their elements, which can significantly affect the operation of the entire mold. Such elements, for example, are:
1) the actual half-molds, depending on the configuration of the casting (mold without detachable inserts or with collapsible elements);
2) rod (movable or stationary);
3) pushers;
4) mold cooling system;
5) system for supplying model composition to the central manifold (assembly of model units);
6) system for supplying model composition for individual models (soldered models);
7) air exhaust system for molds.
In insertless molds, the model is formed either in both halves or in one, usually the lower half of the mold. Both halves of the mold must fit together along the parting surface, which can be flat or profiled. The mold cavity must be designed in such a way that when the mold is opened from both halves, the model can be easily removed.
In a collapsible mold with a complex cavity profile, to remove the model, inserts, rods and other elements must be removed from it before opening the mold. Such solutions are used only in cases where the casting configuration is very complex and it is impossible to create the mold parting plane without detachable parts.
The complex shape of cavities or holes in the model is obtained using rods that are placed perpendicular or parallel to the parting plane; in the latter case - side rods. Rods with a perpendicular arrangement relative to the parting plane, if the casting configuration allows it, are recommended to be secured in the lower half of the mold. For small series of castings, side rods should be removed manually; very small cores are removed from the mold along with the models.
Rice. 5. Metal composite rod forming a complex cavity configuration
Rice. 6. Location of pushers in the mold
Pushers are used to push models out of the working cavity of the mold; they are located in the lower half of the mold (Fig. 17). The parting plane must be chosen so that when the mold is opened, the model remains in the lower half. Since pushers leave an imprint on models, they should be placed on work surfaces if possible.
The pushers must have a locking device, or special plates are made in the mold to prevent the movement of the pushers during pressing of the model composition. Profile pushers are fixed in the mold (due to their possible rotation around their axis). Has proven itself to be the best material for pushers gray cast iron, designed for bearing bushings according to CSN 42 2456. The pushers are driven by a pressure plate through a hydraulic drive or manually. The pushers return to their original position in most cases by a compressed spring.
In many cases, models can be removed without pushers using compressed air supplied through a gas-permeable insert (Fig. 7).
To shorten the hardening cycle and eliminate external local shrinkage on the surface of the models, the molds should be cooled. Cooling the mold with cold water is most effective. In molds without inserts, cooling channels are made in one or two half-molds; in molds with inserts, the nests for the inserts are additionally cooled. The dimensions of the cooling channels are usually not calculated, and the designer determines them based on his experience and the possibility of their placement in the mold. Channels must be provided near the most massive parts of the model. Often used for cooling drinking water. The water temperature varies from weather conditions, which does not allow setting a single cooling mode. It is advisable to carry out cooling in a special refrigeration device and maintain a constant water temperature.
Rice. 7. Removing the model from the mold using compressed air: 1 – SUPPLY compressed air; 2 - gas-permeable insert
It is necessary to fix the upper and lower halves of the molds together in the parting plane. This is ensured in most cases by centering pins or a protrusion-recess type design in molds made of low-melting alloys or plastics (Fig. 8). Zinc alloy halves are fixed by drilling out a cavity in one half of the mold before pouring the other half.
Rice. 8. Fixing the mold halves using a protrusion
Large-sized molds or molds for the production of models in large series are fixed on the plates of a pressing device, so the designer must provide a method for attaching the molds to the plate of such a device. Molds of small sizes or for models of small series are not secured, but are installed and removed from the pressed device manually.
Air is removed from the mold through the gaps between the guide bushings and pushers along the parting plane or along specially made grooves.
Press molds with full mechanization and automation of assembly and disassembly are suitable for the manufacture of models in large series or for mass production. Investment casting foundries in Czechoslovakia do not yet produce these types of molds, since castings are produced in relatively small batches. The use of automated molds involves high-performance pressing equipment and associated transport devices for transferring molds from assembly, pressing, cooling and disassembling positions.
If foundries use various types of pressing equipment, then corresponding mold designs are also used. This creates certain difficulties, since each foundry needs to design and manufacture different mold designs. Therefore, each precision casting foundry must have its own mold manufacturing technology, which depends on the equipment and various devices necessary for one or another type of production.
Economic comparison of individual mold manufacturing methods. Initially, lost wax molds were made from metals by machining. In order to reduce production costs and expand the possibility of using investment casting, other, cheaper and more efficient castings have been developed and proposed. quick ways production of molds.
In this table, labor costs are systematized relative to the costs (assumed as 100%) for the production of steel molds by machining. Labor costs reflect the costs associated with producing identical, simple molds. in various ways. The degree of accuracy is classified according to a five-point system. The difference between individual scores is not equivalent. For example, the difference in accuracy between scores 1 and 2 or scores 2 and 3 is smaller than between scores 4 and 5. The solidification time was determined experimentally based on the results of observations of the cooling of identical lost wax models in molds of various types.
This is the time that is necessary to keep the model in the mold and then remove it without the risk of damage and deformation during further technological operations. Data about this time are for informational purposes only. There may be deviations from the given values. This depends, for example, on the model composition used and the temperature of its pressing.
The last column of the table. 13 contains information about the durability of molds. The durability of molds made using the same technology depends on many factors: the size of the models; the position of the parting plane in the mold, especially when the parting plane passes along a surface that does not have a processing allowance; the number and quality of pushers and, finally, on the careful care of the mold during its operation, adjustment and adjustment, as well as on the condition of the pressing equipment. The data is taken from practical experience in investment casting foundries, where molds were manufactured using the given technological processes.
In practice, machined molds will also be used, since this is the only production method for making molds for models of large overall dimensions and weighing more than 10 kg. The most complex models in configuration, with a complex parting plane and detachable parts, will be produced in the same molds. Models of castings produced in large batches with high requirements for surface cleanliness and dimensional accuracy are produced in steel molds obtained by mechanical processing.
Fess molds made of low-melting alloys are used in the production of small series castings. This is a relatively fast and reliable method, which, taking into account the previously stated reasons, always finds application in investment casting.
If necessary, check the designed technological process When producing single castings, for example for repair needs, molds made of gypsum or silicone rubber are suitable. Epoxy resin molds are used for urgent production of single castings.
From a review of the advantages and disadvantages of molds made by various methods, it is clear that at present and in the near future it cannot be assumed that only one method of making lost wax molds will be used in any foundry. It is economically profitable to produce molds not only by mechanical processing, but also mainly from zinc and low-melting alloys. The extent to which the methods described will be used will depend on production program, on the configuration and overall dimensions of the castings being manufactured.
If a technologist is developing a technology for a new casting, he must know all the circumstances that influence the choice of mold. This is the only way to design a mold that will ensure maximum cost-effective production of a new casting.
When designing various types molds, the following criteria are decisive:
1) series sizes and estimated number of castings;
2) configuration and overall dimensions of castings;
3) required dimensional accuracy of castings;
4) thermophysical properties of the mold material;
5) costs for manufacturing molds;
6) equipment for pressing the model composition into a mold.
The main documentation that the technologist develops and transfers to the designer for the production of drawings and molds is a casting drawing or a drawing of a master model with detailed instructions on the type and method of manufacturing the mold.
Stamping, which is performed using a metal press, is one of the most common technological operations for processing this material. The essence of this procedure is to give a workpiece made of metal the required shape, for which plastic deformation is used, squeezing out a certain relief, patterns or punching holes. Presses for metal processing, depending on the list of tasks for which they are intended, differ from each other in both their technical parameters, and design.
Stamping as a method of processing metal blanks can be:
The first implies that the metal is processed in a heated state. The great advantage of hot stamping is that when it is performed, the characteristics of the workpiece being processed are improved (in particular, the metal structure becomes denser and more uniform). Meanwhile, a layer of scale is not created on the surface of metal workpieces processed using technology, while the dimensions of the finished products are more accurate, and their surface is smoother.
Depending on the type of workpiece being stamped, such a technological operation can be sheet or volumetric. Stamping of the first type is used for processing sheet metal blanks; this technology is used to produce:
Finished metal products produced using technology do not require further development. The formation of their geometric parameters when performing volumetric stamping occurs in special forms in which hot or cold metal is subjected to extrusion.
The press machine is usually used for:
According to the principle of operation, pressing machines can be of the mechanical or hydraulic type and perform metal processing using static or impact methods.
Mechanical pressing equipment can be designed according to its design:
Crank machines are used for both cold and hot. This stamping equipment is also used to perform such technological operations as drawing, cutting and cutting. The hydraulic press is used for stamping and forging technological operations with bulk metal blanks.
According to their functionality, pressing machines are divided into the following types:
A universal pressing machine has the widest functionality; such equipment can be used to perform almost any forging operation. Specialized dies or presses are used to implement one technological process. Special presses that are used for stamping products of one type have minimal functionality, while their operation is based on one technology.
The design of any stamping equipment consists of the following elements:
Depending on how the drive motor of the press is connected to its actuator, machines with a connection are distinguished:
The actuating mechanism with which equipment for stamping is equipped can be traverses, a slider, rolls, rollers and women.
The main structural element of these presses is the crank mechanism, which converts the rotational motion it receives from the drive into the reciprocating motion of the slider. The actuator, which is equipped with a stamping press of this type, is connected directly to the slider, capable of developing a force of up to 100 tons. The movement of the slider in such presses occurs at the same frequency.
Crank-type presses can be simple, double or triple acting equipment. Using such machines, you can perform the following technological operations:
In cases where more powerful equipment is required to form a finished product from a metal billet, hydraulic type machines are used.
Using a hydraulic press, you can press both larger and thicker-walled metal parts. Such equipment for sheet metal stamping, die stamping, forging, bending and other technological operations, depending on the specific model, can develop forces from 150 to 2000 tons or even more.
The main structural elements that any one is equipped with are two cylinders of different diameters, which are filled with working fluid and communicate with each other. Each of these hydraulic cylinders has a piston that creates pressure of the working fluid or moves under its influence. It is the movement of pistons in hydraulic cylinders that ensures the movement of the actuator of the equipment. The amount of force that such a stamping press can create is determined by the difference in the diameters of its hydraulic cylinders.
A radial forging machine is a forming press in which preheated metal blanks are converted into finished goods cylindrical configuration. The design of presses of this type is:
Request a call back:
A mold is a complex device designed to produce products of various configurations from rubber, metals, plastics and many other materials using pressure created on special injection molding machines. Molds are typical for both mass and serial production. They are used in injection molding of metals and polymeric materials, investment casting, and also in the pressing of polymeric materials.
The process of making molds is labor-intensive because it has quite complex specifics and requires significant material costs. Therefore, it is extremely important to choose reliable contractors who successfully carry out their production in order to obtain high-quality and durable products.
Specialists of Zavod Spetsstanmash LLC have impressive experience in the production of technological equipment for casting products from various materials.
Our plant carries out the design and manufacture of molds, and work of any complexity is carried out promptly by highly qualified professionals. For production, we use exclusively modern, multifunctional machines equipped with the latest technology, which allow us to produce form-building parts as quickly and efficiently as possible. Our company is ready to provide guarantees for the long-term operation of molds and the accuracy of products cast with them.
The minimum production time is 10 working days and depends on the characteristics of a particular product, the availability of a suitable workpiece and other factors.
At Spetsstanmash Plant LLC, the production of molds takes place in several stages:
If you need to order the production of molds of varying complexity in compliance with impeccable quality and at an optimal cost, then contact us using the contacts listed on the website.
In the shortest possible time, you will be able to receive those products that meet all your requirements and needs. We work with individuals and legal entities.
Molds are used in cases where it is necessary to optimize the process of manufacturing products for various purposes by casting. The raw material in such cases can be metal, plastic or other material with good fluidity, processed under pressure. Such designs significantly simplify production and allow achieving maximum accuracy in accordance with the given dimensions and configuration. This reduces the processing time of products and, accordingly, their cost.
The production of molds using specialized equipment takes place in several stages. First you need to get the blank, and then the product itself. It will not be possible to avoid the intermediate stage due to complexity cross section design profile. Thus, the sequence of actions can be represented as follows:
It is profitable to purchase productive, reliable and functional equipment for making molds from Top 3D Shop. We cooperate with reliable manufacturers known all over the world, guarantee high-quality service and provide competent advice. We will help you choose the right machine and place your order.
MOSCOW, July 1 – RIA Novosti. In Russia, on July 1, anti-terrorism amendments, known as the “package...
Project objectives: Hypothesis: Trichomonas cause diseases of the genitourinary system, intestines, mouth, blood, and blood vessels. Diseases:...
47.) Actions to assist a ship in distress and rescue people after its death. 48. Phase rns. Accurate...
10/14/2019 , Sashka Bukashka Can vacation time expire if an employee does not take it off year after year? If it has accumulated over...
In living nature: Part of animal and plant proteins, vitamins, hormones. Sulfur is a non-metal. Continue...
Hurricanes were the first Allied combat aircraft to arrive in the USSR. August 28, 1941 24 fighters of the type...
Minister of Economy and Finance of the Moscow Region. Education: 2002 Drexel University (USA), major...
Automation of production processes is the main direction in which...
Target audience: Owners, general directors; Development directors, top managers; HR –...
Which, throughout the entire production process, transfer their cost in parts to the product being manufactured...
Theory This property was first noted by Kenneth Arrow in a 1963 paper entitled "Uncertainty...
Salaries in the public sector in one way or another affect the amount of earnings in commercial organizations....
Summer is the time for vacations and trips. And going on the road today, almost everyone strives to capture their...
You can get comfortable not only in a SV carriage or a compartment, but also in a reserved seat or a general one. For a comfortable...
Project objectives: Hypothesis: Trichomonas cause diseases of the genitourinary system, intestines, mouth, blood, blood vessels....
47.) Actions to assist a ship in distress and rescue people after its death. 48. Phase rns....