Manufacturing of metal structures according to drawings. Prices for the production and installation of metal structures - cost of work Steel structures to order

• Excellent quality. Reliability and durability of products are laid down already at the project development stage in the drawings. For the production of metal structures, materials and components tested for strength and stability are used.
• Complex nature of the work. Design of metal structures and their manufacture in compliance with technological requirements. Then we deliver the products to your site in a short time. In addition, our company carries out all stages of construction and installation work, for which there are appropriate certificates.
• Efficiency. Our company has implemented modern technological solutions and uses specialized computer programs for optimization of drawings. Together with great professional experience This allows us to produce metal structures of any size and shape in a short time.
• Affordable prices. We set ourselves the task of calculating the optimal price for the production and installation of metal structures in accordance with the specific terms of reference(project, drawing, sketch). The initial cost of products is from 50,000 rubles per 1 ton.

Manufacturing of metal structures to order appeared in the service line of the NovoStroy company in 2013. This process is characterized by high manufacturability, demands on equipment and raw materials, and compliance with precise product parameters.

Even the slightest omission on the part of the manufacturer can have catastrophic consequences for the operation of the building.

Therefore, our production is equipped with advanced equipment, all routine processes are protected from the influence of the “human factor”. And where required original ideas and non-standard solutions, technically savvy personnel potential is attracted.

Assortment offer from the NovoStroy plant

Innovative technical base gives us the opportunity to operational production standard and combined metal structures. In the first case, standard solutions and dimensions are taken as a basis, in the second they are modified taking into account the specifics of the order.

If necessary, unique architectural, structural or engineering developments design bureau offers individual design of any complexity with subsequent production of metal structures to order.

The most in demand are construction products for frame type buildings: beams, purlins, columns, trusses, braces, etc.

Cost of construction work

Price list for cutting sheet material

Stages of manufacturing custom metal structures

At the initial stage, the tasks that need to be implemented are determined, the initial documentation is assessed, and the issue of the need to design metal structures and the scope of this service is decided.

Often, customers have a ready-made CM section (metal structures) on hand. In this case, for the production of metal structures, it is necessary to compile part of the KMD (detailed metal structures).

Based on the finished drawings, the production of blanks begins, which are then mechanically processed using milling, turning and other equipment.

The parts are assembled and welded. They are cleaned, degreased, painted with anti-corrosion paint and dried using drying machines.

After this, they undergo preliminary tests and are sent to the technical control department.

At this point, the production of custom-made metal structures is considered complete. They are packaged and delivered to the installation site.

Why us

We have completed hundreds of orders not only in Moscow, but throughout Russia. In our portfolio you can find an object of any specificity in many designs.

Constantly updating the material base and introducing latest technologies, we speed up and facilitate the process of producing metal structures. At the same time, the price of the final product decreases, as the cost price becomes cheaper.

If you need to make metal products, contact us! "Fire-Steel" can be implemented in the form finished products drawing of any complexity, regardless of urgency and volume.

Main professional activity a company that practices an individual approach - a full production cycle. It begins with the stage of purchasing high-quality raw materials, individual engineering design and ending with the release of finished products that meet all national and foreign standards. The results of the work of Fire-Steel professionals are distinguished by a high level of quality. Metal structures, equipped with the necessary documentation, are extremely durable and guarantee safety in operation.

That is why they are in demand in many household areas, and are not limited to agriculture, industry and construction!

Trust criteria

There are objective factors that make the production of metal structures in the capital of consistently high quality, which is difficult to compete with. Let's name the three most important reasons that determine the competitiveness of Fire-Steel products.

Firstly, close attention is paid to the formation of the staff: they are experienced, highly qualified specialists. Regular practical and theoretical training allows specialists to acquire new knowledge in accordance with the increasing complexity of technology.

Secondly, workplaces are 100% equipped with innovative equipment, since only the human factor, complemented by modern technical means, allows you to achieve high performance.

Finally, on production of metal structures black metal is coming. Such steel is a material tested by experience and time that never fails.

Benefits you can't keep silent about

Of course, we have favorable prices in all respects hardware- it is devoid of markups, commissions and other unpleasant “add-ons”. Current prices are transparent and optimized to the maximum for both us and the buyer, and the payment terms are simple and convenient.

We not only create metal structures in Moscow that meet all GOST requirements, we offer the client at least 3 additional bonuses:

• loyal cost policy. Our prices are affordable;
• the ability to choose the option with an invoice (VAT 20%);
• production is carried out as quickly as possible.
• low cost of manufacturing metal structures

The comfort of purchasing a product is further enhanced thanks to its fast, well-thought-out delivery and affordable price. It is possible to any region and address Russian Federation. Many of our clients from Moscow, Rostov-on-Don, Kostroma and other localities have already been convinced of the impeccability of logistics and delivery speed. Our production of metal structures is organized at the highest level.

How we work

Fire-Steel has been manufacturing metal structures in Moscow since 2011: during this time, it has taken a leading position in the relevant service market and honestly earned a reputation as a reliable and principled manufacturer. Our partners include large public and private corporations.

The trust and appreciation of our clients is a consequence of our constant efforts in no less than three areas of development.

First. High level quality, noticeable even in the smallest details. At the same time, we strive to make the price-quality ratio extremely beneficial for clients, working with them without intermediaries. No damage to quality for minimal money! Affordable cost of production and installation

Second. We interact decisively with all Moscow and regional customers, regardless of their “size” and organizational and legal forms. Third. A strong material and technical base helped us become a leader: large workshops, innovations and advanced technologies.

How to become a client

So that we can produce metal structures in exact accordance with the drawing and requirements, go through just four steps, with minimal loss of time, nerves and money!

Start by calling the contact number: our trained employee will advise you on any issue and resolve all misunderstandings.

Next comes the formation stage commercial offer according to your application: we will carefully calculate how much the production of structures and installation will cost, objectify it in detail, making each line of expenses clear.

The third step is the work of our craftsmen, designers, engineers and other specialists. We have a package of permits to perform any type of work:

• certificates;
• licenses, etc.

The final stage is the careful delivery of finished products to the customer’s door. No delays or violations of contract terms.

Product range

Fire-Steel annually expands its already extensive list of functional products intended for various commercial, household, construction and industrial purposes. We we manufacture metal structures in the form of road barriers and staircase barriers, balconies and roofs, bridge structures and frames of industrial and residential buildings. On this large assortment We don't run out of durable, aesthetically pleasing products! We regularly release exclusive and traditional modifications:

• filling elements and parts;
• baths for welding work;
• columns, trusses and connections;
• supports for road signs and wheel guards that comply with traffic regulations;
• canopies and pavilions (for organizing smoking areas regulated by law);
• metal fire escapes.

So why us?

Among dozens of similar offers in Moscow, ours stands out with a set of significant parameters. At least five of them become decisive for our customers when choosing Fire-Steel products.

First: the ability to implement every project under strict control, from elementary to super complex, replete with architectural and technological solutions.

Second: even particularly large structures are delivered by special transport to the site of subsequent installation.

Third: we optimize the speed and quality of installation with competent factory assembly.

Fourth: we help with assembly.

Fifth: our work is based on accurate calculations and high technologies, which give the corresponding results of safety, durability, strength and resistance to corrosion and destruction of finished products, the service life of which is measured at least 40 years.

For construction companies discounts all summer!!!

• LSTK profiles with holes from PS 100 to PS 400 with a thickness from 1.5mm to 4mm: 62,000 rubles/t

The construction of buildings based on metal frames cannot be called a fundamentally new direction, because people have been building houses this way for decades. However, the production of light steel thin-walled structures has brought low-rise construction to new level. The production and installation of such buildings is carried out in a matter of days, and they pay for themselves many times faster than traditional buildings.

Today, metal structures are called inexpensive and lightweight buildings erected using frame technology. The main thing in such a building is a reliable and durable frame, which, after manufacturing and installation, is sheathed with insulating and finishing materials. As a result, construction resembles a construction set, and installation is carried out according to a special scheme. What material to cover the walls and ceilings with, as well as what to make the roof from, depends on the purpose of the building and the region of operation.

Distinctive features of buildings based on light metal frames

Objects built on the basis of a metal frame in Moscow would not have become so popular if they did not have a number of key advantages. Among the most important advantages, the following should be noted:

• very low weight of the structure, and as a result – low pressure on the ground. This allows the use of metal structures in those regions where capital construction impossible due to soft and unstable soils;
• no need for a massive and expensive foundation. The light weight of the structure allows you to make do with the simplest and most inexpensive foundation options - shallow strip and pile-screw;
• amazing speed of material production and construction. No object made of stone, concrete or wood can be assembled in one week. Buildings made of lightweight metal structures, especially small ones, can be assembled by a team of 3-4 people in just a few days;
• the use of metal structures makes it possible to achieve the ideal geometry of the structure. Using this method, it is much more difficult to make mistakes in measurements and calculations, since all this has already been taken into account, and all parts are strictly adjusted to each other at the factory during manufacturing;
• the use of metal structures is the most economical type of construction. Lack of expensive foundation, large quantity labor force for installation and special equipment allows significant savings without compromising the quality of the structure.

For what objects in Moscow can metal structures be used?

Even though there are many cases where a metal frame is not suitable for construction, the scope of metal structures is still very wide. Here are just a few types of objects for which this type of construction is ideal:

• warehouses and hangars;
• industrial buildings, workshops, utility rooms;
• residential low-rise frame houses, cottages, dachas;
• covered garages, parking lots, boxes, pavilions;
• small architectural forms;
• public buildings.

Approximate frame prices in Moscow for prefabricated hangars

How are buildings made from metal structures manufactured and installed in Moscow?

Our plant offers the manufacture and installation of metal structures various types and appointments in Moscow. The quality of the products meets all necessary standards and can be used for construction in any region of the country. Production is carried out on the most modern expensive equipment, finished products goes through several stages of quality control.

What needs to be done to order the production of metal structures from us? Any order for the production and installation of metal structures through the efforts of our plant begins with a telephone call to our consultants, written request or a personal visit to our office. You will be offered a large catalog containing large number ready-made standard designs for buildings made of metal structures.

If none of the ready-made solutions are suitable, we are ready to develop a project for you from scratch, taking into account all your requirements and wishes. Sometimes this is necessary if you are running an unusual business or simply want your building to be visually different from nearby objects.

After this, the stage of agreeing on all the necessary details begins. Our specialists calculate the cost of work and the amount of material required. We carry out all tasks related to the design, production and installation of buildings ourselves, without the involvement of intermediaries. This directly affects the cost, making cooperation with us the most profitable financially.

After all calculations are completed, our plant begins production of metal structures. At this stage, we manufacture all the necessary elements for the future frame of the building. Each product has a special marking, which is necessary to avoid errors during the installation process.

The next step is to send all manufactured materials to the customer’s construction site. If this is provided for in the contract, then the next stage of our work will be the installation of the foundation. The work is being carried out in parallel with the production of metal frame parts. Due to the insignificant weight of the future structure, you can limit yourself to a pile foundation or strip foundation.

Following the foundation comes the installation of the structure. Our specialists will comply with all norms and requirements for frame buildings. For connection, only those methods indicated in the wiring diagram are used. If it suddenly turns out that some fastening is missing, we will make it in as soon as possible, and is not replaced by an alternative method of connecting frame parts. Any deviation from the design scheme is considered a violation, which is unacceptable in our work.

What can simplify the production and installation of metal structures?

Extensive work experience is the secret of a successful approach to each client. We effectively use the knowledge and experience of our specialists when organizing the construction process. Our tasks include not only project development, production and installation of a metal frame, but also taking into account supply logistics, competent use of technology, as well as control construction estimate in order to prevent its increase during the work.

Metal structures are widely applicable and form the basis of many buildings and structures. Their production simplifies the construction process and provides the opportunity to build durable building structures in a short time.

Application of metal structures

Metal structures are designed for the construction of various objects:

• residential buildings, cottages;
• premises for industrial and agricultural purposes;
• shopping centers, entertainment complexes, hotels;
• kindergartens, schools;
• other objects.

For the manufacture of metal structures of any complexity, high-quality rolled metal is used, guaranteeing the strength and reliability of the buildings.

Metal structures are produced using factory equipment. Plasma and laser cutting devices, new welding equipment allow us to produce metal structures of any complexity. We guarantee the efficiency of the work carried out.

How the price for the production of metal structures is determined

The price directly depends on the volume of work performed and its complexity. It is determined at the design stage and fixed in the contract. It can be changed by adjusting the scope of work. The change is fixed by an additional agreement.

Significant production turnover provides the opportunity to buy rolled metal at a fair price. Favorable conditions for the purchase of raw materials increase competitiveness, which helps reduce costs.

Our advantages

We occupy a leading position in the market. We carry out complex work - we design, manufacture and install metal structures. Our experience allows us to guarantee the expected result.

We offer prices suitable for large and small businesses.

We produce metal structures quickly, taking into account all the customer’s specifications. We have a service that provides control over the purchase of raw materials, production, delivery, and installation. By using the services once, you will become a regular customer.