26.12.2023

Job description for pre-production engineer. Job description of a production preparation engineer Qualification requirements for an engineer of category II

Specialists who have received higher engineering, economic or technical education are experiencing more and more difficulties finding employment. At the same time, the labor market is overflowing with offers for in-demand technical specialties that are not popular among engineers. Production preparation is one of these areas that needs more attention from job seekers.

Prospects and remuneration

A production preparation engineer is a promising position that requires great personal responsibility, attentiveness and impeccable professional skills.

High demands are compensated by decent working conditions, career prospects and stable wages: even a beginner specialist can count on 20,000-45,000 rubles per month.

What does a pre-production engineer do?

Responsible work involves a long list of job responsibilities. The effectiveness of the measures he develops depends on how well a professional understands the specifics of each stage of the labor cycle.

The Lead Production Preparation Engineer manages the following segments of the work process:

Timely provision of machinery, equipment, and components in sufficient quantity. The specialist calculates the quantity of materials, sends documentation with data for bulk purchases, monitors the remaining number of tools and replaces technical units in case of their premature failure.
Development and introduction of labor standards. The production preparation department engineer prepares optimal options for solving production problems; introduces standards to improve production efficiency.
Compliance with production standards. The specialist is responsible for the timely implementation of the calculated standards. Not only minimum standards are taken into account, but also prepared schedules of calendar advances.
Developing the most efficient loading cycles production technology. Both performance indicators and natural wear parameters of machines are taken into account. The responsibility of the leading engineer is to calculate cycles that will allow you to get the maximum without premature wear of the equipment.

Secondary tasks of the position

For consists of listing the responsibility factors that the specialist must control at the initial stages of the implementation of the production program. Main responsibilities also include:

Analysis of labor activity of subordinate workshops and work areas. Optimization of production cycles, reduction of human and mechanical labor spent on production.
Search and activation of production reserves. Identification of labor opportunities and capacities not involved in the main production cycle.
Communication between management and workers. Organization of a smooth, rhythmic work process with maximum efficiency, without delays or procrastination. Preventing routine violations of any kind, creating an environment and conditions for an effective production cycle.
Reporting. Drawing up reports on the efficiency of the team, the use of equipment, and the results of introducing changes into the production cycle. Because production engineer reports involve large amounts of data, reporting tools are often used computer technology and special software. The form of the report is established by management.

A specialist involved in production preparation influences the efficiency of the entire production activities in the organization.

A production engineer's responsibilities are varied, but the job offers more opportunities for personal and career growth.

Qualification requirements for category I engineer

The position requires highly specialized training. Only candidates who meet the following requirements should submit a resume for the specialty:

Work experience: production preparation engineer, 2nd category, from 3 years.

High competition prevents a quick search for work in this profile. Most effective method- “vertical elevator”: promotion from category II without changing the employer company.

Qualification requirements for category II engineer

Entry into the profession is open to specialists with specialized education and professional experience at least 3 years. An applicant counting on category II must meet the following requirements:

Higher professional education: engineer-economist.
Alternative option: higher vocational technical education.
Work experience: production preparation engineer, from 3 years.
Alternative work experience: related engineering and technical positions for specialists with higher technical (engineering and economic) education, from 3 years.

If you have experience in responsible positions requiring appropriate qualifications, then you have the right to apply for category II.

Qualification Requirements

A specialist applying for an uncategorized engineer position is not required to meet the same strict work experience requirements. For ETKS pre-production engineers, there are two options for provisions for the applicant.

Requirements for persons with higher education vocational education:

Higher technical education.
Higher engineering and economic education.
Work experience: not required. University graduates without work experience are accepted.

Requirements for persons with secondary vocational education:

Secondary technical education.
Secondary engineering and economic education.
Work experience: category I technician, from 3 years.
Alternative experience: work in the specialty, from 5 years.

What a specialist must know

The engineer's instructions for production preparation contain all the basic information that a specialist should be able to navigate freely.

The list of materials required to study and master includes:

Methodological instructions and regulatory materials establishing priority production planning.
Reference materials on the organization of the work cycle.
Resolutions and orders of management that affect the duration and standards of the production cycle.
The order of preparation of new programs and production cycles.
The order of assignments for daily shifts.
Predicted and actual production capacity of equipment.
Complete information about manufactured products: nomenclature, variations, production specifics.
Full information about production work or services provided by enterprises.
Basic information about product manufacturing technology and the mechanics of the production cycle.
Working relationships between workshops and production sites various specializations, understanding the dynamics of labor relations in the production process.

Also, the required knowledge of a pre-production engineer includes mastering the means of organizing warning systems, dispatch services and communication devices. Uninterrupted communications ensure timely completion of the production cycle.

General knowledge required by a specialist

The position allows you to use the skills and knowledge acquired in the process of studying at higher education educational institution. To achieve success in production optimization, an engineer must be fluent in the following disciplines:

Basics of organizing labor processes.
Fundamentals of management.
Fundamentals of Economics.
Fundamentals of labor legislation of the Russian Federation.

A specialist has to combine theoretical knowledge in various fields of economics and management every day in order to achieve the best results using existing equipment and the current team. Detailed knowledge of established labor standards and labor protection rules is also required: production must be organized in accordance with the letter of the law.

Advantages of the profession

This specialty Suitable for people who are passionate about work optimization. The pre-production engineer determines whether production capabilities used to the maximum. This is a position where there is no time to be bored. Strong specialists receive stable bonuses and become respected professionals for management.

The speed of professional growth is directly related to personal initiative. The specialist independently develops proposals for improving the production cycle and submits them for discussion.

You can get a job in your specialty without specialized work experience, which makes the position attractive for graduates of specialized universities. It takes only 6 years to obtain category I.

We bring to your attention a typical example of a job description for a production preparation engineer, sample 2019/2020. should include the following sections: general position, job responsibilities of a pre-production engineer, rights of a pre-production engineer, responsibility of a pre-production engineer.

Job description production preparation engineer belongs to the section " Industry-wide qualification characteristics positions of workers employed at enterprises, institutions and organizations".

The job description of a pre-production engineer should reflect the following points:

Job responsibilities of a pre-production engineer

1) Job responsibilities. Using computer technology, communications and communications, carries out production preparation, control over the provision of production with components, materials, tools, and the timely execution of all necessary technical documentation, develops monthly production programs and shift-daily assignments for the assigned area of work. Participates in the development and implementation of standards for operational production planning. Monitors the completeness of work in progress, compliance with established standards for backlogs and calendar advances in the work of production departments. Calculates calendar charts equipment loading taking into account more efficient use production capacity, monitors their implementation. Analyzes the work of workshops and sections, seeks opportunities to shorten the cycle of manufacturing products and performing work (services), identifies production reserves, and develops proposals for their use. Monitors the implementation of the production plan and takes measures to ensure rhythmic work, prevent and eliminate process disturbances production process, effective use equipment, creating favorable conditions for labor collectives to implement the production program. Maintains established reporting.

The pre-production engineer must know

2) When performing his job duties, a production preparation engineer must know: resolutions, instructions, orders, methodological and regulatory materials on issues of production planning at the enterprise; development order production programs and shifts - daily assignments; production capacity of the enterprise, range of products, types of work (services) performed; organization of production; fundamentals of the production technology of the enterprise's products; organization of production progress accounting; specialization of workshops, sections, production connections between them; means of organizing and mechanizing the dispatch service; fundamentals of economics, labor organization and management; basics of labor legislation; rules and regulations of labor protection.

Requirements for the qualifications of a pre-production engineer

3) Qualification requirements.

Production preparation engineer of category I: higher professional (technical or engineering-economic) education and work experience as a production preparation engineer of category II for at least 3 years.

Production preparation engineer category II: higher professional (technical or engineering - economic) education and work experience as a production preparation engineer or other engineering and technical positions filled by specialists with higher professional education, at least 3 years.

Production preparation engineer: higher professional (technical or engineering - economic) education without requirements for work experience or secondary vocational (technical or engineering - economic) education and work experience as a category I technician for at least 3 years or other positions filled by specialists with secondary vocational education, at least 5 years.

1. General provisions

1. A pre-production engineer is classified as a specialist.

2. A person who has a higher professional (technical or engineering-economic) education without presenting requirements for work experience or a secondary vocational (technical or engineering-economic) education and work experience as a technician of category I for at least 3 years is accepted as a production preparation engineer. other positions filled by specialists with secondary vocational education, at least 5 years.

3. A pre-production engineer is hired and dismissed ______ (director, manager) organization represented by _____ (position).

4. The pre-production engineer must know:

decrees, instructions, orders, methodological and regulatory materials on issues of production planning at the enterprise;
the procedure for developing production programs and daily shift assignments;
production capacity of the enterprise, range of products, types of work (services) performed;
organization of production;
fundamentals of the production technology of the enterprise's products;
organization of production progress accounting;
specialization of workshops, sections, production connections between them;
means of organizing and mechanizing the dispatch service;
fundamentals of economics, labor organization and management;
basics of labor legislation;
rules and regulations of labor protection.

5. In his activities, the production preparation engineer is guided by:

legislation Russian Federation,
Charter (regulations) of the organization,
orders and instructions ______ (general director, director, manager) organizations,
this job description,
Internal labor regulations of the organization.

6. The production preparation engineer reports directly to: _____ (position).

7. During the absence of an engineer for production preparation (business trip, vacation, illness, etc.), his duties are performed by a person appointed ______ (position) of the organization in the prescribed manner, who acquires the corresponding rights, duties and is responsible for the performance of the duties assigned to him.

2. Labor responsibilities of a pre-production engineer

Pre-production engineer:

1. Using computer technology, communications and communications, carries out production preparation, control over the provision of production with components, materials, tools, timely execution of all necessary technical documentation, develops monthly production programs and daily shift assignments for the assigned area of work.

2. Participates in the development and implementation of standards for operational production planning.

3. Monitors the completeness of work in progress, compliance with established standards for backlogs and calendar advances in the work of production departments.

4. Calculates calendar schedules for equipment loading, taking into account more efficient use of production capacity, and monitors their implementation.

5. Analyzes the work of workshops and sections, seeks opportunities to shorten the cycle of manufacturing products, performing work (services), identifies production reserves, and develops proposals for their use.

6. Monitors the implementation of the production plan and takes measures to ensure rhythmic work, prevent and eliminate disruptions in the production process, effectively use equipment, and create favorable conditions for work teams to implement the production program.

7. Maintains established reporting.

3. Rights of the pre-production engineer

The production preparation engineer has the right:

1. Submit proposals for management’s consideration:

to improve work related to those provided for in this instructions and duties,
on the encouragement of distinguished employees subordinate to him,
on bringing to material and disciplinary liability workers who violated production and labor discipline.

2. Request from structural divisions and employees of the organization information necessary for him to perform his job duties.

3. Get acquainted with the documents defining his rights and responsibilities for his position, criteria for assessing the quality of performance of official duties.

4. Get acquainted with the draft decisions of the organization’s management relating to its activities.

5. Require the management of the organization to provide assistance, including providing organizational and technical conditions and registration established documents necessary for the performance of official duties.

6. Other rights established by the current labor legislation.

4. Responsibility of the pre-production engineer

The production preparation engineer is responsible in the following cases:

1. For improper performance or failure to fulfill one’s job duties provided for in this job description - within the limits established by the labor legislation of the Russian Federation.

2. For offenses committed in the course of their activities - within the limits established by the current administrative, criminal and civil legislation of the Russian Federation.

3. For causing material damage organizations - within the limits established by the current labor and civil legislation of the Russian Federation.

Job description for pre-production engineer - sample 2019/2020. Job responsibilities of a pre-production engineer, rights of a pre-production engineer, responsibility of a pre-production engineer.

Job description
production preparation engineer

[name of organization, enterprise, etc.]

This job description has been developed and approved in accordance with the provisions Labor Code Russian Federation and other regulations governing labor relations in the Russian Federation.

I. General provisions

1.1. A production preparation engineer is classified as a specialist.

1.2. A person who has a higher professional (technical or engineering-economic) education and work experience as a category II preproduction engineer for at least 3 years is appointed to the position of category I pre-production engineer; for the position of a production preparation engineer of category II - a person who has a higher professional (technical or engineering-economic) education and work experience as a production preparation engineer or other engineering positions filled by specialists with a higher professional education for at least 3 years; for the position of production preparation engineer - a person who has a higher professional (technical or engineering-economic) education, without presenting requirements for work experience, or a secondary vocational (technical or engineering-economic) education and work experience as a category I technician of at least 3 years or other positions filled by specialists with secondary vocational education, at least 5 years.

1.3. A production preparation engineer is appointed and dismissed by the head of the enterprise upon the recommendation of [fill in what is required] and reports directly to [fill in what is needed].

1.4. The pre-production engineer must know:

Resolutions, directives, orders, methodological and regulatory materials on issues of production planning at the enterprise;

The procedure for developing production programs and daily shift assignments;

Production capacity of the enterprise, range of products, types of work (services) performed;

Organization of production;

Fundamentals of the production technology of the enterprise's products;

Organization of recording of production progress;

Specialization of workshops, sections, production connections between them;

Means of organizing and mechanizing the dispatch service;

Fundamentals of economics, labor organization and management;

Fundamentals of labor legislation of the Russian Federation;

Rules and regulations of labor protection, safety, industrial sanitation and fire protection;

- [fill in what you need].

1.5. During the absence of a pre-production engineer (vacation, illness, etc.), his duties are performed by a person appointed in the prescribed manner.

1.6. [fill in as required].

2. Job responsibilities

Pre-production engineer:

2.1. Using computer technology, communications and communications, carries out production preparation, control over the provision of production with components, materials, tools, timely execution of all necessary technical documentation, develops monthly production programs and daily shift assignments for the assigned area of work.

2.2. Participates in the development and implementation of standards for operational production planning.

2.3. Monitors the completeness of work in progress, compliance with established standards for backlogs and calendar advances in the work of production departments.

2.4. Calculates calendar schedules for equipment loading, taking into account more efficient use of production capacity, and monitors their implementation.

2.5. Analyzes the work of workshops and sections, seeks opportunities to shorten the cycle of manufacturing products and performing work (services), identifies production reserves, and develops proposals for their use.

2.6. Monitors the implementation of the production plan and takes measures to ensure rhythmic work, prevent and eliminate disruptions in the production process, efficient use of equipment, and create favorable conditions for work teams to implement the production program.

2.7. Maintains established reporting.

2.8. [fill in as required].

3. Rights

The production preparation engineer has the right:

3.1. Receive from managers and specialists of the structural divisions of the enterprise the information necessary to carry out their activities.

3.2. Submit proposals on pre-production issues for consideration by the enterprise management.

3.3. Require the management of the enterprise to provide assistance in the performance of their official duties.

3.4. [fill in as required].

4. Responsibility

The production preparation engineer is responsible for:

4.1. For improper performance or failure to fulfill one’s job duties as provided for in this job description, within the limits determined by the labor legislation of the Russian Federation.

4.2. For offenses committed in the course of carrying out their activities - within the limits determined by the administrative, criminal and civil legislation of the Russian Federation.

4.3. For causing material damage - within the limits determined by the current labor and civil legislation of the Russian Federation.

4.4. [fill in as required].

The job description has been developed in accordance with [name, number and date of document].

Head of structural unit

[initials, surname]

[signature]

[day, month, year]

Agreed:

Head of Legal Department

[initials, surname]

[signature]

[day, month, year]

I have read the instructions:

[initials, surname]

[signature]

[day, month, year]

If you are considering other options (besides employment as a pre-production engineer), then do not limit yourself to this selection of advertisements; we have many other positions for various positions. There you can also use the search for offers from direct employers and agencies.